Double row angular contact ball bearing

Four-point contact ball bearings are radial single row angular contact ball bearings with raceways that are designed to support axial loads in both directions. For a given axial load, a limited radial load can also be supported (Load ratio). The bearings are separable, comprise solid outer rings, split inner rings and ball and cage assemblies with brass or polyamide cages. The two-piece inner rings enable a large complement of balls to be accommodated. The inner ring halves are matched to the particular bearing and must not be interchanged with those of other bearings of the same size. The outer ring with the ball and cage assembly can be mounted separately from the two inner ring halves.Four-point contact bearings are single-row angular contact ball bearings and therefore require significantly less space in an axial direction than double-row designs.In conclusion, these advantages improve the overall cost-efficiency of the bearing position significantly and thus bring about a sustainable increase in the efficiency of the machine and equipment.Wuxi LOTTON Bearing Manufacturing Co., Ltd. China four-point contact ball bearings manufacturers-Wuxi LOTTON Bearing Manufacturing Co., Ltd.,Main products include various ball bearings, roller bearings

single row angular contact ball bearings can accommodate axial loads in one direction only， and should always be adjusted against another bearing which accommodates the opposed thrust load.  Their bearing rings have an upper and a lower shoulder and are non-separable.Spindle bearings are a special design of the single row angular contact ball bearings; they were developed primarily for high-speed work spindles of machine tools. The spindle bearings differ from the angular contact ball bearings by the contact angle, the degree of accuracy, and the type of cage. Single row angular contact ball bearings, which are intended for mounting in pairs (in sets) directly adjacent to each other, are manufactured in the so-called universal design.these bearings can be used in pairs in any arrangement without shims. Depending on the design selected, the mounted bearing pair has the required axial clearance, freedom from clearance or preload. This gives easier design of the bearing arrangement and mounting of the bearings.Wuxi LOTTON Bearing Manufacturing Co., Ltd. BestQuality single row angular contact ball bearings Factory,LOTTON bearing is implementing the ISO9001 quality control system

Single row deep groove ball bearings are the most widely used bearing type. The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of the balls. In addition to radial loads, axial loads can be imposed in either direction. Because of their low torque, they are highly suitable for applications requiring high speed and low power loss.They are available capped (with seals or shields) or open. Open bearings that are also available capped may have recesses in the ring side faces.With steel shields, non-contact or friction rubber seals installed on one or both sides and are pre-lubricated with grease. These bearings can be supplied filled with different types of grease and with different filling levels depending on the customer requirements.The large production series allows their relatively low price.Wuxi LOTTON Bearing Manufacturing Co., Ltd. Wholesale single row deep groove ball bearings bearing ball deep groove withgoodprice-Wuxi LOTTON Bearing Manufacturing Co., Ltd.

Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection.Wuxi LOTTON Bearing Manufacturing Co., Ltd. BestQuality self-aligning ball bearings self aligning bearing Factory

Single Row Cylindrical Roller Bearings are designed to support heavy radial loads and are some of the most common bearings used around the world. These roller bearings consist of an Outer Race, Bronze or Steel Cage, a complement of rollers, and usually an Inner Race.Wuxi LOTTON Bearing Manufacturing Co., Ltd. BestQuality single row cylindrical roller bearings bearing roller cylindrical FactoryWuxi LOTTON Bearing Manufacturing Co., Ltd. Best BestQuality Single Row Cylindrical Roller bearings bearing roller cylindrical Factory | LOTTON FactoryPrice-Wuxi LOTTON Bearing Manufacturing Co., Ltd.

spherical roller bearing.Wuxi LOTTON Bearing Manufacturing Co., Ltd. Professional spherical roller bearing spherical roller manufacturersWuxi LOTTON Bearing Manufacturing Co., Ltd. Best spherical roller bearing spherical roller Supplier

double row cylindrical roller bearingsThese bearings are designed for spindles which are subject to high rigidity requirements, most often lathe spindles.Wuxi LOTTON Bearing Manufacturing Co., Ltd. Professional double row cylindrical roller bearings manufacturers

thin section bearingsDue to its high precision, thin wall, quiet operation and strong carrying capacity, thin-section ball bearing has incomparable superiority compared with ordinary bearings, so it is also used in many industries, especially in aviation. Aerospace, military, medical and other requirements are relatively high, and the equipment with small size and light weight has been widely used. The thin-section bearing also solves the problem that the conventional bearing can't solve. It also realizes the section of the extremely thin bearing, and realizes the miniaturization and light weight of the product. Because of this advantage, the diversity of the thin-section ball bearing is achieved. , expands its scope of use. Precision thin-section ball bearings are also very different in the performance of the bearings. In order to obtain low friction torque, high rigidity and excellent rotation accuracy of the bearings, the outer diameter of the steel balls is smaller than other types of bearings. In order to ensure the weight and wiring space of the thin ball bearing, the hollow shaft is also applied to the thin bearing.Wuxi LOTTON Bearing Manufacturing Co., Ltd. Wholesale thin section bearings withgoodprice-Wuxi LOTTON Bearing Manufacturing Co., Ltd.,LOTTON bearings are widely used, including construction machinery, CNC lathes, pumps, automobiles, mining, textile machinery and more.